b
Replacement for earphones
I was bothered with the straight connector of my headphones sticking out of soundcard ready to be broken away by any careless move and cable at right angle prone to breakage. So I've bought this Neutrik NP3, my friend electrician helped me to replace the connector and I have much safer connection now. The jack fits better and in my opinion the sound is better, too. It was worth the effort.
0
0
Zgłoś nadużycie
aT
Works great with sample pads
Pros
Any device with lots of TRS inputs and outputs on its back laid out horizontally, such as drum modules and sample pads, will benefit from using angled connectors like this. Cables are nicely hidden, don't get struck, bent or pulled out as easily as straight ones.
I have paired this connector with the BPX-L large chuck and boot and used it on a 7.6mm diameter cable. It somehow works better with a large cable size than the slimmer straight connector NP3 X-B does.
Cons
The tip and ring pins are quite close to each other and there is a piece of plastic separating them, so one has to be careful not to melt that.
The 2 parts of the shell may slide apart and create a gap as you tighten the boot unless you hold them together tightly. Even if done properly there still is a small gap between the 2 parts of the shell where water or vapor may enter.
Any device with lots of TRS inputs and outputs on its back laid out horizontally, such as drum modules and sample pads, will benefit from using angled connectors like this. Cables are nicely hidden, don't get struck, bent or pulled out as easily as straight ones.
I have paired this connector with the BPX-L large chuck and boot and used it on a 7.6mm diameter cable. It somehow works better with a large cable size than the slimmer straight connector NP3 X-B does.
Cons
The tip and ring pins are quite close to each other and there is a piece of plastic separating them, so one has to be careful not to melt that.
The 2 parts of the shell may slide apart and create a gap as you tighten the boot unless you hold them together tightly. Even if done properly there still is a small gap between the 2 parts of the shell where water or vapor may enter.
0
0
Zgłoś nadużycie
FR
So happy with this purchase!
Can't get any better than Neutrik. Reliable, built to last, great connection, easy to solder, engineered brilliantly. Super happy.
1
0
Zgłoś nadużycie
LZ
A Neutrik standard
Bought it to replace a regular low quality stereo jack on my Fishman Loudbox footswitch. VERY sturdy, the amount of anti-strain and protection built into this is beautiful - a plastic casing inside to protect the wiring, a rubber cable cap that lightens any tugs of the cable from the jack, the slide lock 2-piece jack construction... it's brilliant. Much better than all the alternatives (Amphenol, Hicon) I've used thus far.
0
0
Zgłoś nadużycie
G
The best there is - don't save on cheaper plugs, not worth it
Can't say enough good things about the original, top of the line Neutrik plugs. If you run a studio or often go on stage, you just don't want to try and save on cables and plugs. There's a reason why a 100 manufacturers are trying to copy the original Neutrik...
0
0
Zgłoś nadużycie
RR
Thanks. I accidentally bought a stereo Jack instead of a mono Jack. Nevertheless, I am very satisfied with the quality!
0
0
Zgłoś nadużycie
GE
Excellent if you're low on space
Neutrik has always been my favorite choice when it comes to jacks/plugs, and as I'm re-wiring my home studio, I went with a huge order of different jacks. These angled ones are great in tight places. I'm using them from my mixer to my monitors, where there's little room behind the mixer.
Gold plated jack are generally better for static wiring, the silver ones will handle being plugged in and out a lot (guitars) better than the gold ones. But for my application with balanced wiring to a monitor, it's not a problem at all, and these jacks are excellent! Very easy to solder!
Gold plated jack are generally better for static wiring, the silver ones will handle being plugged in and out a lot (guitars) better than the gold ones. But for my application with balanced wiring to a monitor, it's not a problem at all, and these jacks are excellent! Very easy to solder!
0
0
Zgłoś nadużycie
k
Very high quality
Whenever you need some high quality plug, please consider Neutrik.
This plug is used to narrow the space of the equipment and the wall due to its folded form of 90*.
This plug is used to narrow the space of the equipment and the wall due to its folded form of 90*.
0
0
Zgłoś nadużycie
A
A great TRS-jack
I've been making my own cables for quite some time and I've always used Neutrik connectors. I bought these to be used as patch cables in my bass amplifier, which has a crossover.
Everything about the plug feels really solid and it just works. The soldering is done easy, since the connection points are well placed and it's easy to keep them separated.
I also like that you can buy color coded end plugs to these connectors. I use them a lot.
Everything about the plug feels really solid and it just works. The soldering is done easy, since the connection points are well placed and it's easy to keep them separated.
I also like that you can buy color coded end plugs to these connectors. I use them a lot.
0
0
Zgłoś nadużycie
i
really recommended!!!!
a graet product that does what it supposed to do very well!
0
0
Zgłoś nadużycie