Do treści strony

Rockcare Fret Rocker Fret Levelling

4.4 na 5 gwiazdek z 154 ocen klientów

Kołyska do progów wahacz

  • Przyrząd do sprawdzania równości progów
  • 5 precyzyjnie wykonanych krawędzi
  • Długości krawędzi: 10 cm, 7,5 cm, 5 cm, 3,5 cm i 2,5 cm
  • Odpowiednie dla instrumentów od long-scale elektryczna gitara basowa po sopran ukulele
  • Wykonane ze stali nierdzewnej
  • Dodatkowe skale pomiarowe w milimetrach i calach po przeciwnych stronach
  • Również możliwość korzystania do sprawdzania i regulacji wysokości akcji strun, krzywizny gryfu, odległości strun, wysokości przetwornika i mostka
  • Wymiary: 100 x 50 x 0,8 mm
  • Grubość: 0,8 mm
  • Waga: 30 g
  • Produkt dostępny od Listopad 2018
  • Numer artykułu 451413
  • Jednostka sprzedaży 1 szt.
35 zł
Ceny z podatkiem VAT
Dostępny w magazynie
1

154 Oceny klientów

4.4 / 5

wykończenie

87 Opinie

N
Nice quality does-it-all tool
NieJestemBotem 19.02.2026
This is a very decent all-around tool. It works as a fret rocker very well, but it also can measure basic stuff. What else you might need?
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
It works, but needs to be smoothed first
Alex<randomInteger> 09.01.2022
First impressions:
- It's thin. On the product photos it looks much thicker, maybe 1.5mm. In fact, it's 0.6 mm thick, just a little bit more than Rock'n'Ruler.
- The edges are not smooth. I had to file them carefully before I dared to put it on the frets of my guitar.

Usage:
After polishing it a bit, I used it on my bass to locate popped frets and fix them. It worked well, did what it should. So the thickness wasn't an issue after all, but I expected to see and feel a different tool.

Conclusions:
It's a useful tool to check your frets quickly, it does the job. But I feel it doesn't stand up to the proud names of Warwick and Framus engraved on it.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
L
medioker
Lum1r 05.06.2023
In my opinion, neither a tape measure nor a rocker :) rocker would have to be thicker, at least these 2-3mm. while measuring tape for spacers nice how they have painted rectangles with standard heights, then it is easier to quickly distinguish at what height is the string than counting dashes
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
W
Edges aren't straigt
Wocky 24.03.2019
Worthless peace of metal.
It is pressed out a bigger sheet of metal, and therefore the edges arent 100% straight but curved.
Don't buy this... unless you have tools to make it straight again...
I tried sanding it straigt on a machined flat surface.. but because it is a manual operation... and a small peace of metal.. you cant get it done... you must machine this perfectly straight...
Now I used blade from a toolnife.. I think they are lasercut.. and thus pretty straight...
wykończenie
4
2
Zgłoś nadużycie

Zgłoś nadużycie