Do treści strony

DI z obciążeniem pozornym Dummy Load i symulacją głośnika

  • Proste rozwiązanie pozwalające uchwycić ciepło i dynamikę brzmienia wzmacniacza bez konieczności podłączania mikrofonu do kolumny podczas występu lub nagrywania w studiu
  • Podłącza się go w miejsce kolumny, zapewniając obciążenie 8 Ω dla wzmacniacza lampowego
  • Generuje sygnał symetryczny i asymetryczny, który można podłączyć do urządzeń rejestrujących, efektów i wzmacniaczy mocy
  • Oprócz oryginalnego obciążenia reaktywnego Suhr Reactive Load, Reactive Load IR wykorzystuje technologię odpowiedzi impulsowej, umożliwiając szybki i łatwy dostęp do szeregu profesjonalnie zmikrofonowanych głośników
  • 16 wstępnie zainstalowanych odpowiedzi impulsowych z kolumn głośnikowych Suhr z głośnikami Celestion
  • Odpowiedzi impulsowe innych firm można załadować poprzez złącze USB
  • Regulacja: IR Select, HP Level, DI Level
  • Przełączniki: Signal 0/+6 dB, Hi-Cut
  • Łącze zasilacza (gniazdo wtyku rurkowego 5,5 x 2,1 mm, biegun ujemny wewnątrz)
  • Pobór mocy: 200 mA
  • Zasilanie sieciowe adapterem 9 V DC
  • Zalecana maksymalna moc wzmacniacza: 100 W RMS
  • Wymiary (sz. x gł. x wy.): 22,35 x 22,6 x 9,6 cm
  • Waga: 3 kg
  • W zestawie zasilacz sieciowy

Złącza:

  • Wejście wzmacniacza: wtyczka jack 6,3 mm
  • Złącze Thru to Speaker: wtyczka jack 6,3
  • Wyjście DI/liniowe bez filtra: wtyczka jack stereo 6,3
  • Wyjście DI/liniowe IR: wtyczka jack stereo 6,3
  • Wyjście słuchawkowe: wtyczka jack stereo 3,5 mm
  • Aux In: wtyczka jack stereo 3,5 mm
  • Produkt dostępny od Styczeń 2019
  • Numer artykułu 455781
  • Jednostka sprzedaży 1 szt.
  • Impedance 8
  • Noise Supression No
  • DI Interface Yes
  • Speaker Simulation Yes
  • Dummy Load (usable without cabinet) Yes
  • Channels 1
  • Active / Passive Active
  • Pad switchable Yes
3 499 zł
Ceny z podatkiem VAT
Dostępny w magazynie
1

15 Oceny klientów

4.5 / 5

właściwości

dźwięk

wykończenie

10 Opinie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BK
Not happy at all
Bob Katsionis 23.02.2021
I was waiting to get my hands on it like nothing else before.
I recently got my Mesa MKIV and was recording with it through Bugera PS1->Mooer Radar loading up some beautiful Jens Bogren IR's. It was a blast.
But in order to be a total pro and take advantage or my poweramp as well, got this one.
So lets go:

The unit has a great sound quality, I can tell. Translates the amp really well. That's good.
However, took like an hour to figure out that it wasn't "reading" IR's as long as it was plugged on the USB.
Disconnected it and started playing. OK.

Then, tried to load my fav Jens Bogren IRs.
Correct bit, length 24bit, 48khz, Mono. All good, I'm not an idiot.
Then...nothing.
Looks like you have to:
Safe Eject USB -> Unplug USB cable -> POWER CYCLE the unit for 3 seconds (!),then restart.
And of course...THERE'S NO POWER ON/OFF SWITCH!!!
Would make sense if you wouldn't need one, but it seems you surely do!
And of course, meanwhile, you need to Standby->Turn Off AMP and back again, cause I guess you can't have it plugged into a load box without the load box turned on. Perhaps not, but don't want to experiment with a Mesa MKIV on that.

And after you do all of these...the Jens Bogren IR's DIDNT WORK AT ALL. Nothing wrong with my side. Other IR's work "fine".

Pros:
-Good construction/quality
-Sound Quality

Cons:
-No power on/off switch
-Only 16 slots of IR's
-No XLR out

Bottom line: total regret for this purchase.

EDIT after 2 months of use:

Jens Bogren digital sent me their updated version of their IR's that work with it. Strange they didn't work in the beginning.
I got a great tone out of my tele-jcm900 SL-x combo for an Iron Maiden low-gain tone I was going for, but still I got no massive tone out of either my EVHIII nor MARKIV. Found myself using a kemper preset which made me very unhappy.
właściwości
dźwięk
wykończenie
8
5
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
P
The best of the best!
PhillipMoita 25.01.2019
In my opinion is the best Reactive Load in the market today. The unit is small and the fan is passive. I use stand alone to practice and with the computer to record. I can use my personal IR?s inside and the sound quality is BRUTAL!
właściwości
dźwięk
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate de
Wystąpił błąd. Proszę spróbować później.
A
Genial für jeden der an seinen Tubes hängt.
Anonimowy 10.11.2021
Habe mir die reactive load gekauft da ich mich nicht von meinem heiß geliebten Röhren Amp trennen wollte. Da ich derzeit nicht mehr in einer band spiele stand das gute Stück nur zuhause rum.

Die mitgelieferten IRs sind absolut top und ich habe bis jetzt nicht den drang verspürt 3rd party IRs zu verwenden. Klingt einfach genial und macht extrem viel spaß damit zu spielen bzw aufzunehmen. Ein weiterer Pluspunkt ist, dass ich durch die load box meinen amp erst richtig kennen gelernt habe. Wer stellt sich schon neben nen 100 watt Verstärker und hört sich stundenlang an wie sich der sound verändert wenn man den master Volumen von 8 auf 6 dreht wenn einem schon bei 4 die Birne explodiert. Ist jeden Cent wert gewesen.
właściwości
dźwięk
wykończenie
8
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate it
Wystąpił błąd. Proszę spróbować później.
a
Perfetto per registrazioni immediate e semplici
angelo85 03.05.2020
L'unità funziona perfettamente, senza latenza e sembra anche duratura. La scelta di IR interna è molto vasta anche se sembra andare in direzione di chitarre distorte, per il suono clean si sente la mancanza di IR un po' più lunghi (il max della lunghezza è 20ms), e forse l'OX è più indicato per questo, ma costa anche il doppio. Se il vostro modo di microfonare l'ampli è con un sm57 e un 121 senza prendere suoni di atmosfera, non noterete alcuna differenza.
właściwości
dźwięk
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie