Do treści strony

Angled jack

  • Extremely flat 6.3 mm angle jack
  • Stereo
  • For cable diameters from 4.0 - 6.4 mm
  • Especially suitable for floor effects
  • Produkt dostępny od Grudzień 2015
  • Numer artykułu 377803
  • Jednostka sprzedaży 1 szt.
  • Installation No
  • Mono/Stereo Stereo
  • Angled Yes
  • Type TRS (stereo/sym.)
  • Plug Jack 6,3 mm TRS male angled
14,60 zł
Ceny z podatkiem VAT
Dostępny w magazynie
1

162 Oceny klientów

4.4 / 5

wykończenie

92 Opinie

B
Złącze dobrze wykonane
BPoland 02.06.2020
Dobra jakość wykończenia. Łatwy montaż. Dobrze się lutuje.
Wygląd nie ma tutaj znaczenia, ale czarny tył jest ciekawy.
Polecam.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
ground contact is missing
t3hh 23.03.2022
contact for soldering the ground wire is missing. The best solution would be soldering the ground into the nickel plated case but this is somewhat complicated process. You need to use acid based active flux (rosin based flux wont work) and more powerful iron. Don't forget to clean the flux after the soldering, it contains acid and will corrode. Some people leave the ground wire unsoldered and use the pressure to make a ground connection but this can not be suggested for critical audio work.
wykończenie
3
1
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
d
Can’t recommend
daTroll 09.05.2021
Only get this if you have no other choice, e.g. if the space is limited. There is no solder lug for the sleeve/shield, so you either try to solder it anyway or just let the shield get crimped when you screw the plug pieces together. Another big problem is quality. One of the plugs I bought wasn’t manufactured correctly in that the tip was loose and could be rotated together with its solder lug. O_o
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
BE
Quality good but design not so
Bo E. 04.05.2016
For all my patch cables I use the mono variant and couldn't be happier! The stereo ones however... You have two solderpoints, one L and one R but the earth has no real soldering contact and has to be pressed against the enclosure of the jack to make contact... which fails eventually... I swear by the mono ones for all my patch cables but the stereo is not recommended !
wykończenie
3
1
Zgłoś nadużycie

Zgłoś nadużycie